Safety 1st car seats
Safety 1st Logo. (PRNewsFoto/Dorel Juvenile) (PRNewsFoto/Dorel Juvenile)

Safety 1st car seats

Safety 1st belongs to the Canadian company Dorel Industries Inc, and Leo Schwartz created it in 1962. Safety1st’s priority is to provide safe products for children. They seek the reassurance of parents through developing trustworthy articles in addition to having centres dedicated to the study of processes and products that support the development of your baby.

The best Safety 1st car seats

Safety 1st Grow and Go All-in-One Car Seat

  • Adaptable to your child’s growth, this Safety 1st car seat is for babies from 2.5 kilos to children of 40 kilos; it is a rear-facing seat with the possibility of facing forward. 
  • Three-position adjustable recline for easy adjustment in the car, 
  • Dimensions are 60 centimeters by 48 cm x 58 cm 
  • The harness supports to keep the harness open, making it easy to get on and off the seat. 
  • Adjust the height of the headrest and QuickFit harness in one step; Even in boost mode 
  • Two integrated cup holders; Easy to clean, the seat pad is removable. 
  • 3-stage car seat 
  • Side impact protection 

Safety 1st 3 in 1

Used for newborn children until they are a big boy or girl, the Safety 1st 3-in-1 baby seats are designed to transport your children from 2.2 to 36 kg.

Includes a removable pad for newborn comfort. When your child is ready to use the seat belt, the car seat can be converted into a booster and used up to 36 kg.

Harness clips keep it in an open position. It allows you to get your child out and in the car seat easily.

The QuickFit harness adjusts to the height of the harness and headrest with a single movement. It is easy to clean because its cover is removable. There is no need to remove the harness completely due to the buttoned cover for easy removal.

More about Safety 1st car seats

Safety 1st Onboard 35 Air 360 Infant Raven HX.

Providing five layers of security, it is equipped with LATCH 1st that accommodates two-kilo babies to 15-kilo toddlers in a rear-facing configuration.

It has an advanced safety structure for side impact protection called AirProtect and the patented GCell HX race car foam to absorb impact energy.

Tested from all angles for frontal, rear, side and rollover impacts, this seat includes soft foam padding throughout the seat for added safety and comfort.

The five-point harness easily adjusts from the front of the car with four heights and three buckle locations.

It is removable if you need to remove the seat and take it with you; it is easy to transport.

Before using a Safety 1st car seat

Using the locking system often facilitates alternate donning to the most common with the vehicle’s seat belt. If your car was built after 2002, it likely has locking attachment points for installation.

Before starting, you must read the instruction manual that comes with the car seat and the car owner’s manual to ensure the baby’s safety.

This guide does not replace manuals that contain complete installation information and important warnings for using the infant seat.

Your child must weigh at least 5 pounds and be at least 19 inches tall to use AIR chairs. A rear-facing seat is recommended for children weighing over 40 pounds or over 40 inches in height.

How to install a Safety 1st baby chair?

It is often easiest to adjust the car seat harness before installing it in a rear vehicle, checking just below the child’s shoulders to see if they are below harness height in the lowest position. If yes, you will need to use a different safety harness for the rear, and the buckle strap must be in the first position.

The second position is the one closest to the heart; it must be ensured that the clip is glued to the child’s chest and above the armpits’ level. Check if the harnesses are not pinching the flat part of the harness.

To make things easier, move the front of the cloth pad. Remove the latch anchors from their storage position and loosen the adjuster so that the latch is as long as possible. The side of the seat belt adjuster is not twisted.

The bolt connector release buttons will face outward at the arrows on the back of the connectors facing up. If everything looks good, but the pad back on the front of the seat.

Basic steps to install the baby seat in the back seat

Prepare the recliner by rotating it under the seat. Ensures that the tether strap used for facing forward is attached to the reclined stand’s correct position.

Place the chair in the centre of the seat position you have chosen. To check the placement, ensure that the car seat is centred between the latch anchors on the vehicle seat. These connectors are identified by the latch symbol and are often found between vehicle seat cushions.

Just angle the seat, so the line is level with the ground. You can place the towel roll under the front of the child safety seat to level the line level.

First, connect the latch connector that is furthest away in that seating position and pushes the connector into the vehicle seat latch anchor. Ensure the anchors are secure, and the red button on the connector is facing outward, and the arrows on the back of the connector are facing up.

Now connect the second latch connector, ensuring it is secure and seated with the red button facing out and the arrows facing up. It may be easier to tighten the latch by pulling through the belt passage opening to access the opening, pulling back on the side of the fabric pad.

Complete recommendations guide for baby car seats here

Latest Recommendations

The child restraint should not move more than one inch in either direction. If the child restraint moves more than one inch, try to tighten the seat belt better with the latch or use a different seating position or install a seat using the vehicle seat belt.

Check periodically to make sure the car seat remains firmly installed and has not come loose during use. Always read and follow the product’s instruction manual.

The placement of Safety 1st car seats may vary from car to car, from a car seat in a particular car. If it cannot be installed correctly in a particular car, please visit the official website www.safetyfirst.com to learn more about car safety seat protection technology and side-impact protection technology.

Leave a Reply